Extension Springs
Extension springs are primarily used in medical ventilator, hand tools and home care equipment for storing energy and exerting a pulling effect. The extension spring must be attached to a device or component, and its end may be a loop or a hook.
KLF provides customized extension springs in the following range:| Shape and size | End type | Material |
| Wire diameter: 0.1-6.0mm * Round Wire * Square Wire * Rectangular Wire * Special Section Wire |
* V-hook over center * Full loop at side * Half loop over center * Small eye at side * Double full loop at side and Special customized |
* Carbon steel wire * High carbon steel wire * Stainless steel wire * Nickel plating stainless steel wire etc |
-
65Mn Steel Extension Spring for Hand Grip
Wire diameter: 1.2mm
Material: 65Mn steel wire
Recommended application: Hand Grip Exerciser -
65Mn Steel Extension Spring for Book Stapler
Wire diameter: 0.6mm
Material: 65Mn steel wire (color zinc-plated)
Recommended application: book stapler -
65Mn Steel Extension Spring for Manual Jigs
Wire diameter: 0.9mm
Material: 65Mn steel wire
Recommended application: Manual jigs
KLF designs and manufactures mechanical spring according to your requirements as below, using a camless spring machine, milling machine, grinding machine and other production equipment.
- Length: Overall length (O/A), Pull length (P/P) or Body length (B/L)
- Diameter: Outer diameter (O/D), Inner diameter (I/D), Middle diameter (M/D)
- Wind direction: left-hand or right -hand
- Ends type
- Material and surface treatment
- Tolerances and working conditions
- ①Gap
- ②wire diameter
- ③length
- ④extension length
- ⑤outer diameter
- ⑥inner diameter
Extension Springs Shape
-
half loop over center -
full loop at side -
long round end hook over center -
small eye at side
-
Machine half hook -
Half loop -
Coned end with swivel -
Square hook -
V hook
-
machine cut plain ends -
single full loop over center -
small offset hook at side -
machine half hook over center -
double full loop at side -
half loop over center -
full loop at side -
long round end hook over center -
small eye at side -
threaded plug to fit plain end spring -
V-hook over center -
extend end eye over center -
drawbar spring -
coned end with swivel bolt - coned end with swivel hook
All of extension springs produced by KLF are customized according to the samples, drawings or size provided by customers directly.
- Material: High carbon steel wire, 301 /302 /304/ 316 stainless steel, carbon steel, nickel plating stainless steel wire or customer specified.
- Surface treatment: Nickel plating, tin plating, white zinc plating, silver plating, blue zinc plating, color zinc plating, etc.
- Corrosion control method: metal coating, chemical coating, non-metallic coating, and temporary coating.
- Wire diameter: 0.1-6.0mm.
Foshan Kong Long Feng Hardware Spring Co., Ltd.
Add.: North Xinxi Second route, Jiyue industry Road, Lunjiao town, Shunde district, Foshan City, Guangzhou Province
Tel: +86-757-22395346
Fax: +86-757-22395365
