DC Low Resistance Test Machine
Model: YD2511
Function: it can test resistance of (compression contact springs.)
Test object: Button touch springs

The instrument can quickly and accurately complete the measurement of DC resistance of transformer windings, and can test resistance of button touch springs, ensuring the button touch spring works normally on the PC board (circuit board) and will not damage other components.

TCD-CNC Automatic Tension and Compression Spring Tester
Model: TCD-A-50N
Function: designed for testing the tension and compression of the spring.
Test object: Extension spring, compression spring

The instrument is mainly used to detect the tightness and torsion resistance of the spring sample to determine whether the spring sample meets the torque requirements. The torque value is considered as an important parameter whether the product equipped the extension spring can be used properly.

Endurance Tester for Torsion Springs
Function: it is used to test the fatigue resistance of torsion springs.
Test object: Torsion spring

The instrument is designed to test the service life of torsion spring. Place the torsion spring behind the instrument and uninterruptedly turn on the machine for a few days, the inspector can observe the number of times of spring rotations in the instrument panel. An intuitive record about number of times requested by the customer is available.

Manual Tensile Testing Machine
Model: SD-1000
Function: this machine can test the tension of the tension spring and the compression ratio of compression springs.
Test object: Extension spring, compression spring

This instrument can test whether the spring's welding function is good.

TXD-S030 Solder Machine
Model: TXD-S030
Function: it is used to test the effect of tin-plating on push button springs
Test object: Suitable for all kinds of springs

This instrument can detect the contours and surface shapes of various complex workpieces.

Salt Spray Test
Model: HN-60
Function: corrosion resistance and surface treatment testing of springs

The instrument is suitable for testing the protective layer of springs and salt spray corrosion test of industrial products.

Surface Treatment Ultrasonic Cleaner
Model: VGT-2054FT
Function: this machine can clean oil on the surface of springs without affecting the spring material.

Under the cavitation effect of ultrasonic cleaning agent, the contaminant on the surface of the cleaned object will be removed through a powerful force, thereby achieving the precise cleaning.

Surface Treatment Tempering Furnace
Model: RJC-420
Function: high temperature treatment for spring shaping.